Paper mill Machines,Paper Mill Machine Manufacturers,Paper Mill Machines Exporters,India

Request a quote

Paper Machine Press Part

Salient Features

Press Section is designed considering the quality of the Paper and Paper Board.
High Efficiency presses with Blind drill coating on top and bottom roll with felting
arrangement for high speed. Presses suitable up to 150 Kg / linear cm are available
Heavy Duty Press up to the finished diameter of 1000 mm are in regular supply
Heavy Duty framing with Hydraulic or pneumatic lading system

Request a quote

M.G. Cylinder

Salient Features

MS fabricated M.G.Cylinder up to 16 feet (4.88 meter) diameter.
Width up to 4.00 mtrs is in regular production.
SS Coating on surface (Optional).
Stress relieved for removing stresses developed during bending and fabrication.
Surface is machined and ground to achieve Mirror finish on the surface -Finish Ra 8 micron.
Scooping system is provided to remove condensate efficiently.
Heavy duty framing is provided for vibration free operation.
Single and double Touch roll is provided depending upon the process requirement.
Spur Gear and pinion in Cast Iron/ MS Fabrication/ polypick, teeth are geometrically evenly cut on precise Hobbing Machine for noise free operation.
MG Cylinder is designed to operate on working pressure up to 6.0 Kgs/cm2.
Hydraulically tested to a pressure of 11.0 Kgs/cm2 and held for 24 hrs.

Request a quote

Paper Machine Dryer Section

Salient Features

M.S (B.Q. Plate) Fabricated drying Cylinders with high evaporation rate
Available in 4 feet, 5 feet and 6 feet diameter
Shell thickness various from 25 mm to 36 mm
Operating Pressure up to 4.5 Kgs Cm² and specially designed for higher working pressure up to 6.0 Kgs Cm²
Suitable heavy duty framing in Graded Cast Iron and Mild Steel fabrication for the maximum coverage of paper at dryer
Rope feeding system is provided for Machine speed over 200 MPM
Dryer surface ground finish to Ra micron balanced dynamically to grade of 6.3 (ISO 1940)

Request a quote

Pope Reeler / Drum Reeler

Salient Features

Pope Reeler is designed on the principle of friction Winding
Primary grab Arm is Pneumatically / Hydraulically loaded and tilted Hydraulically mechanically with manual operation.
Secondary arm is loaded Pneumatically / Hydraulically
Pope drum is MS Fabricated and designed to with stand required nip pressure and provided with Doctoring arrangement
Framing is Heavy duty in Cast Iron construction

Request a quote

Rewinder

Salient Features

Heavy Duty Rewinder for trimming and rewinding of Paper Web in required Reel Size.
Rewinding is done by friction on double drum rolls duly loaded with chrome coated Rider Roll
Slitting arrangement is provided with pneumatically loaded trimming knives.
MS fabricated with frame proper stiffeners with Cast Iron Slide rail.
Rider Roll is pneumatically balanced.
Pusher roll for dislodging the rewound roll on collecting table.
Pneumatically operated braking arrangement.
Trim Handling system is provided with Blower and Dual Ventury
Maximum operating speed is up to 500 MPM and driven by DC/ AC variable speed drive.

Request a quote

Drive Arrangement for paper Machine

Salient Features

Line shaft drives as well as sectional drive depending up on the Machine speed.
Heavy duty Worm Gear Boxes / Bevel Helical gear boxes.
Pneumatically operated Rubber tube clutches with shoe grips line Shaft drive.
Cone Pulley for different sizes
DC variable / AC Variable Frequency drive.
Sectional drives with DC variable speed drive with digital synchronizing
Hand operated Belt shifters. Motorized option is also available

Request a quote

R.F. Cylinder Mould Former for Multilayer Paper board

Salient Features

Totally in Stainless Steel Construction.
Suitable for Machine speed of 120 MPM
Least Profile Variation
Very good formation and sheet pickup of 3 5 GSM to 120 GSM
Zero fiber loss due to rubber cord sealing.
Better dewatering with Air suction on the wire.
Adjustable Couch roll off center.
SS Suction knife for removal of water at couch nip.
Pressurized feed with Custom designed Tapered Manifold and Evener roll for uniform distribution.

Size Press and online Coating Station

Salient Features

Inclined size press designed for on line sizing on the paper/paper board.
Rolls are lined with special rubber suitable for surface sizing.
Size kitchen in SS construction.

This is a bar coater for clay coating on DUPLEX BOARD, min -6 gram to 8 gram coating

Metering Bar Coater : Qty: 1 No.
Applicator Roll : Ø165 -with suitable face length Drive: D.C. Motor, R.P.M. 0 to 102,2 HP and can drive the roll clockwise or anticlock
Metering Rod : Ø 10 mm up to 2500 mm face and above 2500mm face -rod 0 16 The metering rod made out of 5.5 mtrl, chrome plated, ground Surface finish, fixed with plastic holder, called rod bed (special design) shall have water circulation system for cleaning the rod in running condition. The plastic holder called rod bed is fixed in 5.5 Holder.
Drive : 2 HP, D.C Motor, R.P.M -0 to 32
Jack System : The complete unit is fixed on fabricated frame and two nos or jack is fitted at both the end for lowering and lifting of the whole unit. Both the jacks are connected by connecting red couplings and fitted with bearings, plummer blocks.
Paper Lead Rolls : Suitable nos of lead roll (6 nos) manufactured
Control Panel : Control panel for both A.C & D.C motors, panel with regulators. Indicators. It also indicates R.P.M. of rod. Applicator roll.

Request a quote

PRODUCT RANGE
Paper Milll Divison		Cement Machinery